{"product_id":"pine-pse-stripwood-34mm-x-6mm-x-2400mm","title":"Pine PSE Stripwood 34mm x 6mm x 2400mm","description":"\u003cp\u003ePine PSE stripwood 34mm x 6mm x 2400mm is a planed-smooth softwood moulding, ideal for beading, framing, and light joinery work. Planed square on all four sides, it arrives ready to cut, fix, or finish with no additional preparation needed.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePine (softwood)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePlaned Smooth on all four sides (PSE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Size\u003c\/td\u003e\n\u003ctd\u003e34mm x 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eStripwood (square edge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat it's used for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBeading and edge detail work on cabinets, shelving, and furniture\u003c\/li\u003e\n\u003cli\u003eFraming and support battens behind wall linings and panels\u003c\/li\u003e\n\u003cli\u003eBoxing-in pipework, soil stacks, and service ducts\u003c\/li\u003e\n\u003cli\u003eCraft, model-making, and general DIY joinery repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting and handling\u003c\/h2\u003e\u003cp\u003eStore this stripwood flat and off the ground in a dry, well-ventilated space before use, and allow it to acclimatise to the room temperature for 24 to 48 hours if it is going into a heated interior. At 6mm thick, it fixes cleanly with panel pins, fine-gauge screws, or a suitable wood adhesive, and pre-drilling is advisable near the ends to prevent splitting. The planed surface accepts primer, paint, or stain readily, so a light sand with 120-grit paper before finishing is all that is normally needed.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does PSE mean on stripwood?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePSE stands for Planed Square Edge. It means the timber has been machined smooth and square on all four faces, so the finished size is slightly smaller than the nominal size quoted. This stripwood is ready to use without further planing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between stripwood and beading?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStripwood is a flat, square-edged section with no shaped profile, whereas beading typically has a rounded or moulded face. This 34mm x 6mm piece is flat stripwood, though it is commonly used in the same applications as thin beading where a neat, square edge is preferred.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I paint or stain pine PSE stripwood?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. Pine takes both paint and stain well. For a painted finish, apply a suitable wood primer before your topcoat. For a stained or varnished finish, sand lightly along the grain first. Avoid applying finish to unseasoned timber, as moisture movement can cause lifting.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What does PSE mean on stripwood?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"PSE stands for Planed Square Edge. It means the timber has been machined smooth and square on all four faces, so the finished size is slightly smaller than the nominal size quoted. This stripwood is ready to use without further planing.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between stripwood and beading?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Stripwood is a flat, square-edged section with no shaped profile, whereas beading typically has a rounded or moulded face. This 34mm x 6mm piece is flat stripwood, though it is commonly used in the same applications as thin beading where a neat, square edge is preferred.\"}},{\"@type\":\"Question\",\"name\":\"Can I paint or stain pine PSE stripwood?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Pine takes both paint and stain well. For a painted finish, apply a suitable wood primer before your topcoat. For a stained or varnished finish, sand lightly along the grain first. Avoid applying finish to unseasoned timber, as moisture movement can cause lifting.\"}}]}\u003c\/script\u003e\u003cp\u003eBrowse the full range of \u003ca href=\"\/collections\/pine-mouldings\"\u003epine mouldings at Nottage Timber Merchants\u003c\/a\u003e for matching beading, architrave, and decorative sections. We offer next-day delivery to Bridgend and across South Wales, or you can collect from our yard in Bridgend at your convenience.\u003c\/p\u003e","brand":"Nottage Timber Merchants","offers":[{"title":"Default Title","offer_id":52568007410001,"sku":"CHES0128","price":3.28,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/1467\/1697\/files\/tm681__29477.1701339754.1280.1280.jpg?v=1765236435","url":"https:\/\/www.timberonline.co.uk\/products\/pine-pse-stripwood-34mm-x-6mm-x-2400mm","provider":"Nottage Timber Merchants","version":"1.0","type":"link"}