{"product_id":"pine-hockey-stick-cover-moulding-12mm-x-34mm-x-2400mm","title":"Pine Hockey Stick Cover Moulding 12mm x 34mm x 2400mm","description":"\u003cp\u003ePine hockey stick cover moulding in a 12mm x 34mm profile and 2400mm length is a softwood timber strip designed to conceal joins, gaps and exposed edges on walls, ceilings, furniture and joinery. Straight-grained and lightweight, it is straightforward to cut and fix for trade or DIY projects.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePine softwood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePrepared (planed and moulded)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Size\u003c\/td\u003e\n\u003ctd\u003e12mm x 34mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eHockey stick cover mould\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat it is used for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCovering the joint between a skirting board and a wall or floor where a gap has opened up over time\u003c\/li\u003e\n\u003cli\u003eFinishing the edge of wall panelling, tongue and groove cladding, or MDF sheet work\u003c\/li\u003e\n\u003cli\u003eConcealing cable runs or pipework along walls and ceilings\u003c\/li\u003e\n\u003cli\u003eAdding a neat decorative border to fitted furniture, shelving and alcove joinery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting and handling\u003c\/h2\u003e\u003cp\u003eBefore fixing, store the moulding flat in the room where it will be installed for at least 24 hours to allow it to acclimatise to temperature and humidity, reducing the risk of movement after fitting. It can be fixed using panel pins, finish nails or a suitable grab adhesive, and mitred corners are best cut with a fine-tooth mitre saw or a mitre block for clean, tight joints. Once in place, fill any pin holes with a wood filler, sand smooth when dry, and finish with paint or a clear varnish to suit your project.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between a hockey stick moulding and a standard cover mould?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA hockey stick moulding has an angled or stepped profile that creates a small overhang on one face, which sits neatly against a flat surface such as a skirting board or wall panel. A standard cover mould tends to have a simpler, flatter cross section. The hockey stick profile is particularly useful where you need to bridge a small gap at a right angle junction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pine cover moulding be painted?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. Pine takes paint well once the surface has been lightly sanded and primed. Apply a wood primer or an all-in-one primer undercoat first to seal the grain, then finish with two coats of your chosen paint. This is the most common finish for interior applications such as skirting and architrave work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lengths would I need for a typical room?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeasure the total linear metres where the moulding will be fitted and divide by 2.4 to get the number of lengths required. Add around 10 to 15 percent for waste from mitre cuts, particularly in rooms with multiple corners. For a standard UK living room perimeter this often works out at between 8 and 12 lengths.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is the difference between a hockey stick moulding and a standard cover mould?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A hockey stick moulding has an angled or stepped profile that creates a small overhang on one face, which sits neatly against a flat surface such as a skirting board or wall panel. A standard cover mould tends to have a simpler, flatter cross section. The hockey stick profile is particularly useful where you need to bridge a small gap at a right angle junction.\"}},{\"@type\":\"Question\",\"name\":\"Can this pine cover moulding be painted?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Pine takes paint well once the surface has been lightly sanded and primed. Apply a wood primer or an all-in-one primer undercoat first to seal the grain, then finish with two coats of your chosen paint. This is the most common finish for interior applications such as skirting and architrave work.\"}},{\"@type\":\"Question\",\"name\":\"How many lengths would I need for a typical room?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Measure the total linear metres where the moulding will be fitted and divide by 2.4 to get the number of lengths required. Add around 10 to 15 percent for waste from mitre cuts, particularly in rooms with multiple corners. For a standard UK living room perimeter this often works out at between 8 and 12 lengths.\"}}]}\u003c\/script\u003e\u003cp\u003eBrowse the full range of \u003ca href=\"\/collections\/pine-mouldings\"\u003epine mouldings at Nottage Timber Merchants\u003c\/a\u003e, including cover moulds, architraves, skirting and decorative profiles. We supply trade and retail customers from our yard in Bridgend, with next-day delivery available across South Wales.\u003c\/p\u003e","brand":"Nottage Timber Merchants","offers":[{"title":"Default Title","offer_id":52567958815057,"sku":"CHES0078","price":4.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/1467\/1697\/files\/tm601__94121.1701339667.1280.1280.jpg?v=1765234691","url":"https:\/\/www.timberonline.co.uk\/products\/pine-hockey-stick-cover-moulding-12mm-x-34mm-x-2400mm","provider":"Nottage Timber Merchants","version":"1.0","type":"link"}