{"product_id":"irwin-880-universal-panel-saw-500mm-8-tpi","title":"Irwin 880 Universal Panel Saw 500mm 8 TPI","description":"\u003cp\u003eThe Irwin 880 Universal Panel Saw is a 500mm hand saw with an 8 TPI triple ground hardpoint blade, suited to general timber cutting tasks including sheet materials, softwood framing, and joinery work. C75 steel construction and a rust-resistant lacquer coating make it a reliable everyday site tool.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eC75 high-carbon steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTreatment\u003c\/th\u003e\n\u003ctd\u003eWater-based lacquer rust protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e500mm (20 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTPI\u003c\/th\u003e\n\u003ctd\u003e8 teeth per inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTooth Grind\u003c\/th\u003e\n\u003ctd\u003eTriple ground hardpoint\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHandle\u003c\/th\u003e\n\u003ctd\u003eUltrasonically welded soft grip\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAngle Guides\u003c\/th\u003e\n\u003ctd\u003e45 degree and 90 degree built-in\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat it's used for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCross-cutting and ripping softwood timber, joists, and studwork\u003c\/li\u003e\n  \u003cli\u003eCutting sheet materials such as plywood, MDF, and OSB to size\u003c\/li\u003e\n  \u003cli\u003eGeneral joinery tasks including fitting skirting, architraves, and door linings\u003c\/li\u003e\n  \u003cli\u003eSite and workshop use where a lightweight, accurate hand saw is needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFitting and handling\u003c\/h2\u003e\n\u003cp\u003eKeep the blade clean and dry between uses to get the most from the water-based lacquer coating. When cutting sheet materials or dressed timber, support the workpiece fully on both sides of the cut line to prevent the saw binding or tearing the grain. The 45 and 90 degree guides on the handle are useful for marking cut lines directly before sawing, which saves reaching for a separate square on a busy site.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between 8 TPI and higher TPI panel saws?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8 TPI gives a faster, coarser cut that suits structural softwood, carcassing timber, and sheet board. Higher TPI saws cut more slowly but leave a finer finish, making them better for finish joinery or fine hardwood work.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAre hardpoint saw blades sharpenable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHardpoint blades are hardened to hold an edge significantly longer than traditional saw blades, but the same hardening process makes them impractical to re-sharpen by hand. When cutting performance drops noticeably, the blade should be replaced.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill this saw cut MDF and plywood without excessive tearing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 8 TPI triple ground tooth pattern is designed as a universal grind, meaning it cuts on both the push and pull stroke and handles manufactured boards including MDF and plywood reasonably cleanly for a hand saw. For very fine face veneers, scoring the cut line first with a knife will reduce breakout.\u003c\/p\u003e\n\n\u003cp\u003eThe Irwin 880 panel saw is stocked alongside our full range of structural and joinery timber at Nottage Timber Merchants in Bridgend. Browse our \u003ca href=\"\/collections\/mdf-sheets\"\u003eMDF sheets\u003c\/a\u003e if you need sheet material to go with it. We offer next-day delivery across South Wales and the Bridgend area on qualifying orders.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the difference between 8 TPI and higher TPI panel saws?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"8 TPI gives a faster, coarser cut that suits structural softwood, carcassing timber, and sheet board. Higher TPI saws cut more slowly but leave a finer finish, making them better for finish joinery or fine hardwood work.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Are hardpoint saw blades sharpenable?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Hardpoint blades are hardened to hold an edge significantly longer than traditional saw blades, but the same hardening process makes them impractical to re-sharpen by hand. When cutting performance drops noticeably, the blade should be replaced.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Will this saw cut MDF and plywood without excessive tearing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 8 TPI triple ground tooth pattern is designed as a universal grind, meaning it cuts on both the push and pull stroke and handles manufactured boards including MDF and plywood reasonably cleanly for a hand saw. For very fine face veneers, scoring the cut line first with a knife will reduce breakout.\"\n      }\n    }\n  ]\n}\n\u003c\\\/script\u003e\u003c\/script\u003e","brand":"IRWIN","offers":[{"title":"Default Title","offer_id":52569323897169,"sku":"L07748","price":8.36,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/1467\/1697\/files\/JAK880UN20__50613.1705336354.1280.1280.jpg?v=1765266785","url":"https:\/\/www.timberonline.co.uk\/products\/irwin-880-universal-panel-saw-500mm-8-tpi","provider":"Nottage Timber Merchants","version":"1.0","type":"link"}