{"product_id":"everbuild-stick-2-spray-contact-adhesive-500ml","title":"Everbuild Stick 2 Spray Contact Adhesive 500ml","description":"\u003cp\u003eEverbuild Stick 2 Spray Contact Adhesive is a fast-bonding, multi-purpose aerosol adhesive supplied in a 500ml can. Suitable for bonding fabrics, foams, laminates, rubber, and lightweight boards, it delivers quick, even coverage for trade and DIY applications without mixing or preparation.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003eEverbuild Stick 2 Spray Contact Adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eAerosol spray\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVolume\u003c\/th\u003e\n\u003ctd\u003e500ml\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eContact adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSuitable Materials\u003c\/th\u003e\n\u003ctd\u003eFabric, foam, laminate, rubber, lightweight boards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication Method\u003c\/th\u003e\n\u003ctd\u003eSpray to both surfaces, allow to tack off, press together\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat it's used for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUpholstery repairs and fabric bonding to foam or board substrates\u003c\/li\u003e\n  \u003cli\u003eBonding laminates and veneers to lightweight timber sheet materials\u003c\/li\u003e\n  \u003cli\u003eSecuring rubber trims, edging strips, and carpet tiles during flooring installation\u003c\/li\u003e\n  \u003cli\u003eGeneral fabrication and workshop assembly where a fast-grab, no-clamp bond is needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFitting and handling\u003c\/h2\u003e\n\u003cp\u003eShake the can well before use and apply an even coat to both surfaces from a distance of approximately 20 to 30 centimetres, then allow the adhesive to become touch-dry before bringing the surfaces together firmly. Once mated, the bond sets almost immediately, so check alignment carefully before pressing. Store the can upright in a cool, dry location away from direct heat and sunlight, and keep the nozzle clear between uses by inverting and spraying briefly after each session.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan Everbuild Stick 2 Spray be used on MDF and sheet materials?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adhesive bonds well to lightweight boards including MDF, making it suitable for laminate facing, edging, and fabric covering of sheet materials commonly used in joinery and shopfitting work.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow long does the adhesive take to tack off before bonding?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTack-off time is typically one to five minutes depending on temperature and porosity of the surface. Apply in a well-ventilated area and allow both coated surfaces to feel dry to the touch before pressing them together.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs Stick 2 Spray Contact Adhesive suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is formulated for interior and sheltered applications. For fully exposed outdoor fixing, a purpose-made weatherproof adhesive would be more appropriate.\u003c\/p\u003e\n\n\u003cp\u003eNottage Timber Merchants stock Everbuild Stick 2 alongside a full range of sheet materials and fixings at our Bridgend trade counter. If you are working with \u003ca href=\"\/collections\/mdf-sheets\"\u003eMDF sheets\u003c\/a\u003e, we can supply both the board and the adhesive with next-day delivery available across South Wales and the Bridgend area.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can Everbuild Stick 2 Spray be used on MDF and sheet materials?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The adhesive bonds well to lightweight boards including MDF, making it suitable for laminate facing, edging, and fabric covering of sheet materials commonly used in joinery and shopfitting work.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How long does the adhesive take to tack off before bonding?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Tack-off time is typically one to five minutes depending on temperature and porosity of the surface. Apply in a well-ventilated area and allow both coated surfaces to feel dry to the touch before pressing them together.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is Stick 2 Spray Contact Adhesive suitable for outdoor use?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It is formulated for interior and sheltered applications. For fully exposed outdoor fixing, a purpose-made weatherproof adhesive would be more appropriate.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"Nottage Timber Merchants","offers":[{"title":"Default Title","offer_id":53049482051921,"sku":null,"price":8.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/1467\/1697\/files\/tbkevbconspray5.webp?v=1771055898","url":"https:\/\/www.timberonline.co.uk\/products\/everbuild-stick-2-spray-contact-adhesive-500ml","provider":"Nottage Timber Merchants","version":"1.0","type":"link"}