{"product_id":"bullnose-primed-mdf-window-board-225mm","title":"Bullnose Primed MDF Window Board 225mm","description":"\u003cp\u003eBullnose primed MDF window board 225mm wide is the go-to solution for finishing internal window reveals with a clean, rounded front edge. Factory-applied with two coats of white primer, each 3.6 metre length arrives ready for a final topcoat, saving time on site.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eMoisture resistant MDF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTreatment\u003c\/td\u003e\n\u003ctd\u003eFactory primed, two coats white primer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBullnose front edge, flat top surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Width\u003c\/td\u003e\n\u003ctd\u003e225mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eBullnose (rounded leading edge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3.6m (3600mm \/ 12ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable Use\u003c\/td\u003e\n\u003ctd\u003eInternal only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat it's used for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFitting to internal window reveals as a finished window sill in new builds and renovation projects\u003c\/li\u003e\n\u003cli\u003eReplacing damaged or worn timber window boards in kitchens and bathrooms where some moisture resistance is required\u003c\/li\u003e\n\u003cli\u003eProviding a consistent, paint-ready surface in social housing, student accommodation and commercial fit-outs where a uniform finish across multiple windows is needed\u003c\/li\u003e\n\u003cli\u003eUse alongside MDF skirting and architrave sets for a fully coordinated, knot-free interior finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting and handling\u003c\/h2\u003e\u003cp\u003eAllow the boards to acclimatise in the installation room for at least 24 hours before fixing, particularly in kitchens and bathrooms where temperature and humidity can vary. Fix using a suitable grab adhesive applied to the back face and underside bearing surface, ensuring full contact along the length to prevent any flex or movement once set. Once fitted, apply one or two coats of water-based eggshell or satinwood topcoat over the factory primer for a durable, washable finish, paying particular attention to any cut ends which should be sealed with primer before painting.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs this MDF window board suitable for use in bathrooms or kitchens?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. The board is manufactured from moisture resistant MDF, which means it has improved resistance to humidity and occasional splashing compared with standard MDF. It is not waterproof, so cut ends and any fixings should be primed and sealed before painting to maintain that resistance over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 225mm primed MDF window board need sanding before painting?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVery little preparation is needed. The two-coat factory primer gives a smooth, consistent base that is ready for a topcoat with a light key using fine-grade abrasive paper if preferred. Any cut ends will need a coat of primer before the topcoat is applied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat adhesive should I use to fix an MDF window board?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA solvent-free grab adhesive, such as a no-nails type or a polymer-based construction adhesive, is the standard approach for a concealed, nail-free fix. Apply in beads along the bearing surface, press firmly into position and support until the adhesive has cured as directed by the manufacturer. Panel pins can also be used for additional security where access allows.\u003c\/p\u003e\u003cp\u003eBrowse the full range of \u003ca href=\"\/collections\/skirting-architraves\"\u003eMDF skirting and architrave profiles\u003c\/a\u003e at Nottage Timber Merchants to match this window board with coordinating interior mouldings. We supply trade and retail customers across Bridgend and South Wales, with competitive pricing and reliable despatch from our Bridgend branch.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is this MDF window board suitable for use in bathrooms or kitchens?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The board is manufactured from moisture resistant MDF, which means it has improved resistance to humidity and occasional splashing compared with standard MDF. It is not waterproof, so cut ends and any fixings should be primed and sealed before painting to maintain that resistance over time.\"}},{\"@type\":\"Question\",\"name\":\"Does the 225mm primed MDF window board need sanding before painting?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Very little preparation is needed. The two-coat factory primer gives a smooth, consistent base that is ready for a topcoat with a light key using fine-grade abrasive paper if preferred. Any cut ends will need a coat of primer before the topcoat is applied.\"}},{\"@type\":\"Question\",\"name\":\"What adhesive should I use to fix an MDF window board?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A solvent-free grab adhesive, such as a no-nails type or a polymer-based construction adhesive, is the standard approach for a concealed, nail-free fix. Apply in beads along the bearing surface, press firmly into position and support until the adhesive has cured as directed by the manufacturer. Panel pins can also be used for additional security where access allows.\"}}]}\u003c\/script\u003e","brand":"Nottage Timber Merchants","offers":[{"title":"3.6m \/ 3600mm \/ 12ft","offer_id":52565899182417,"sku":"WINDMDF2525536","price":32.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/1467\/1697\/files\/thirdlight-31827538241__01078.1697715942.1280.1280.jpg?v=1765211273","url":"https:\/\/www.timberonline.co.uk\/products\/bullnose-primed-mdf-window-board-225mm","provider":"Nottage Timber Merchants","version":"1.0","type":"link"}